1 / 2
Modified Pinecil & cable insert for "Rugged Multipart Pinecil Case V2"
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modified insert for the "Rugged Multipart Pinecil Case V2" to store only the Pinecil and its USB cable.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 125
- Makes
- 0
- Views
- 1,355
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A modified insert for the "Rugged Multipart Pinecil Case V2" (large version) to store only the Pinecil and its USB cable.
Since I don't have space for the optional soldering iron holder in my printed case, I removed the clamps for that holder and the small hex key from the original insert to make some room for potentially storing small accessories. Otherwise, the model is identical to the original.
Print settings
- Layer height 0.2 mm
- Line width 0.42 mm
- 4 wall lines
- 4-5 top & bottom layers
- Infill ≥15%
- Supports not required
Approximate print time @ 60 mm/s: 3:20 h