Bunnings Modular Filament Drawer System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of RCDIY's modular drawer system using hardware found at Bunnings.
- Rating
- 0 / 5
- Likes
- 106
- Downloads
- 340
- Makes
- 0
- Views
- 4,863
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
This is a remix of RobertCowanDIY's Modular Filament Drawer System to use hardware found at Bunnings hardware stores.
CAD file has been cleaned up to make it easier to modify yourself.
Printed with 2 walls, 5 top & bottom layers, and 20% gyroid infill.
Parts List:
Holman 15mm PVC
Goliath Soft Close Drawer Slides (or standard to save a few $)
6g x 16mm Wood Screws (for connecting modules, faceplates, middle supports. 20 required per module, additional for connecting modules together)
6g x 10mm Wood Screw (for connecting drawer slides, comes with the drawer slides)
Taskmaster 12.7 x 1.5mm Door Buffer (these are only used on the bottom unit as feet, optional)
235 x 19mm DAR Pine (used for the face, optional)
6g x 30mm Wood Screws (used to attach the handles when using 19mm wood)
Heat Insert Option:
Use this if your slides didn't come with the short wood screws.
M3x10mm BHSC
M3x5x4 Heat inserts
M3 washers, preferably 9mm OD (search M3 mudguard washer) - used if putting M3 into the larger holes.
Edit 2:
Added a faceplate that doesn't have holes for a cover, and a beefier front handle that uses that screws that come with the slides.
Edit 1:
I've uploaded frames that accept M4 or M5 as the screws that come with the rails are too long for the frames, ideal size is 8mm.