Estes Saturn V Replacement Base
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.03 – €4.93 net (excluding VAT)
For file: Estes Saturn V Base and Fins - Rev 1.0_0.4n_0.2mm_PLA_MK3.9_4h52m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.48 excluding VAT (range midpoint).
- Weight reported by the author
- 48 g
- Print time reported by the author
- 4.87 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement base and fins for an Estes Saturn V model rocket
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 50
- Makes
- 0
- Views
- 236
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After crashing my model rocket I had to recreate the base and fins.
I'm including the source SCAD model so you can tweak it to your heart's content!
Print in PLA using either Vase-mode or as few perimeters as possible. Remember, weight is your enemy!
(Note: Photo is of v0.9 before I corrected the number of ribs and added the fuel lines)