1 / 3
Zebra CR 2278 Scanner Wand Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Zebra CR 2278 Scanner Wand Stand
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 86
- Makes
- 0
- Views
- 1,266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wand stand for a Zebra CR2278 barcode scanner.
I designed this stand from scratch when I determined there was a need to anchor the base at an angle and distance that allows the scanner to be used in a top down orientation while in the wand stand. The base is angled at 30 degrees.
The wand base needs to be attached to the stand using 2 x M4x5 screws. There is a gap ion the bottom of the base to accommodate a screwdriver.
I printed the example in the photos on an X1C at 250mm/s. Supports needed. Print on it's side and support the bridges.
Step file and stl included.