1 / 1
EnXLosure 5-part top panel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified top panel remix, based on PeterM's 2-part top panel. Now with 4 separate parts plus panel itself.
- Rating
- 4 / 5
- Likes
- 16
- Downloads
- 88
- Makes
- 0
- Views
- 524
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
A remixed top panel for the EnXLosure, using a separate sheet for the top panel, and splitting the four sides into separate parts to be less susceptible to warping issues.
Requires the following additional hardware:
- 14x M3 inserts
- 14x M3x8mm screws
Changes made to PeterM's remix:
- Broke the frame into 4 parts since I was lifting the whole magnetic sheet of the heat bed when printing PeterM's remix due to warping. Uses same type of hardware as the original EnXLosure.
- Removed the very shallow chamfers to make it easier to print top-down. Still works with the standard EnXLosure panels and vertical posts.
- Increased thickness to 6mm to allow heat inserts to be used.
Print top-down using supports, preferably using support enforcers (1 degree is enough!).