1 / 6
Fully 3D printed Balisong
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fun little 3D printed Balisong/Butterfly knife you can do pretty much all balisong tricks on it
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 500
- Makes
- 2
- Views
- 2,064
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print instructions:
The pins MUST be printed with 100% infill, to do this in Cura, select the pin, on the left side of the screen select Per model settings>select settings>infill density>100%
You may need to print the handles with a brim.
I recommend putting a small amount of glue in or on top of the pin to keep it from falling out when dropped, don't glue the pin to the blade.
There are two handle designs and blade designs, the ones in the photos are Arrow Handle and Hexagon Blade.
FYI: If you drop it on hard floor to much the pins will fall out, unless you put glue in the pins.
Comment any suggestions/changes you want to see. Upload your make I want to see how others turned out :D
You are NOT allowed to sell my balisong on any website or store without MY permission.