1 / 4
Pegboard mount for 5in/125mm Knipex Pliers Wrench  86 03 125 - Magnetic — image 1
1 / 4

Pegboard mount for 5in/125mm Knipex Pliers Wrench 86 03 125 - Magnetic

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Pegboard mount for 5in/125mm Knipex Pliers Wrench 86 03 125 - Magnetic

Rating
5 / 5
Likes
14
Downloads
90
Makes
1
Views
621
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

Use 3x6mm magnets. The hexagons holes allow you to get them out easier if absolutely needed. But you do need to hammer/press them in. No glue needed. 

Printing

You do not need supports for the hexagon hones, this was able to be printed with the top on the build plate with just a single tree. See picture

About the cleats

This attaches to the pegboard using cleats so it can securely attach to the pegboard. Why? Well when I would remove some of my tools, the holder would come out with it.  The video explains a lot of it.

I included 2 different cleats (depending on how tight they end up printing) and the step file for them so you can modify them as needed. They print just fine without supports and I have been using PLA for it without issue (quick to print more if you break them). I also found that sometimes I needed to deburr them to get them to slide easily. But it's also kinda nice if they don't slide super easily if you are doing a semi-permeant. You can just lightly use a hammer to get them to slide all the way down.

 If they break off, Ive just used a hammer and a small screwdriver to back them out of the groove

 

 

Tags