Whirlpool Dishwasher Detergent Latch Release
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Using for: Whirlpool Dishwasher DWH B00 (Ikea). The detergent door latch broke. Unfortunately, this bolt is not…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 30
- Makes
- 0
- Views
- 268
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Using for:
Whirlpool Dishwasher DWH B00 (Ikea).
The detergent door latch broke. Unfortunately, this bolt is not available as a spare part. Only the entire unit is available.
Code for Entire Unit 481241868155
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
160
Infill:
100
Filament: Material4Print PETG Doesn't matter
Notes:
Using the Prusaslicer default settings for 0,16mm will work (Screenshot: Cura)
Printing with 10mm brim and full support is recommended.
Post-Printing
Cut Support and add new O-Ring
Everything at your own risk!
Disconnect the dishwasher from outlet
Dismantle the front of the dishwasher (kitchen-cover 4 screws, front 4 screws, NOT! the 2 upper screws)
Use a cutter to pinch off the head of the old latch
Push out the latch (beware of falling parts!)
Push in the new latch (new o-ring recommended) in the bracket
If it doesn't work probably (close the detergent door and try to open it by pushing the bolt in his magnetic switch) use a little tiny screw between the bracket and the latch to fix it
How I Designed This
Tinkercard
Category: Replacement Parts