Gazebo Cover End Point
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an end cap point for a gazebo cover. It is designed to fit a square frame tube with an opening approx 15.6mm (square) and outside dimension of 17mm (square).
I printed mine in PETG (due to it being outdoors) and used supports and a brim due to the small size.
Gazebo-end-cap-v3_50mm.stp is a 50mm long version (not including the plug part).
Gazebo-end-cap-longer-81mm.stl is an extended version with an 80.9mm overall length (not including the plug part).
Gazebo-end-cap-longer-95mm-V3.stl is the longest version at 95mm in overall length (not including the plug part).
I would recommend printing the small one first to test and then you can scale up or down from there to get the right fit with your gazebo frame. Prtinting flat will offer the most strength, though it will still require some supports. I have been using the 95mm version which was printed flat for several years outside, and they have been holding up well.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20
Filament:
Duramic PETG White
Category: Sport & Outdoors