Moon Lamp Simple Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basic base for all 3D Printed Moon lamps, and anything else. It mimics the wooden block bases you get if you buy.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 251
- Makes
- 1
- Views
- 868
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Didn't manage to take a picture of this before it was sent off with a custom 3d Printer Moon lamp....
But this is a basic base for all 3D Printed Moon lamps, and anything else. It mimics the wooden block bases you get if you buy one or buy a kit - you need to print THREE of them, and they just slot together. Use glue if you want or your printer is super dialled in and they are too loose.
I needed a quick base to give with a present of a 3D printed moon lithophane, so I quickly knocked this up as a duplicate to the wooden versions.
I'll see if I can print another one off and take a picture.
Print Settings
Printer:
P3Steel Toolson Ed
Rafts:
Doesn't Matter
Supports:
No
Resolution:
200
Infill:
20
Filament: any PLA
something dark
Notes:
PRINT THREE!!! Print them laying flat on the bed with the mortise and tenon pointing up - so no supports needed.
They should just slot together to make a tri-pronged base to sit the sphere on. Use some glue if you want it to be more strong or the fit is too loose.
Category: Other