Fire Stick Remote Holder (for 3M Command Strips)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a holder for an Amazon Fire Stick Remote. The design was inspired by CRSC's version here…
- Rating
- 4.333 / 5
- Likes
- 19
- Downloads
- 202
- Makes
- 4
- Views
- 666
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a holder for an Amazon Fire Stick Remote. The design was inspired by CRSC's version here (https://www.thingiverse.com/thing:4689662), though I was unable to use that model to remix from and just redesigned it from scratch. The main differences being that this model mounts with 3M Command strips (I used the larger size like these). This version also has an open front, with a cut out at the bottom to make sliding the remote out a bit easier.
This has been printed and tested, but unfortunately it is not cosmetically great due to a screw up in my settings and possibly some slightly old filament. But it does work.
If you make one, please post a make. The STP file is uploaded for easy remixing.
Update 4/23/2022 - Thanks to the comment from Enduro512 who pointed out some ugly seams on the sides of the model. These seams were not in the original, but for some reason they occur when I first tried to export the file as an STL. I was able to work around the problem finally, and the updated version (Fire_remote-Holder-1F.STL), which I hope fixes this issue, is now uploaded.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
25%
Filament: Duramic PLA Black
Notes:
no supports needed
Post-Printing
Apply the command strip to the back and leave a bit of the tab hanging out below the model if you want to make it easier to remove later.
Category: Gadgets