1 / 2
Filament Box for Box from Kaufland
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This one is for a box from the german supermarket chain Kaufland
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 41
- Makes
- 0
- Views
- 745
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Another filament box.
This one is for the box: “Spice & Soul Food Storage Container 4.7l” put upright.
It does not have a holder for a hygrometer or silica.
You need:
- 4 x Ball Bearing 608 (8mm inner dia, 22mm outer dia, 7mm width
- 2x M3 x 20mm (length of 18mm to maybe 40mm is fine)
- optionally 4x M3 x ~20mm for screwing trough the box
To print:
No support necessary, optimized for 0.2mm layer height.
- 2 x Roller.stl
- 1 x back_side.stl
- 1 x front_side.stl
- 1 x base.stl
- do not print full_model.stl
The base and the holder are designed to be screwed together trough the box. In the end I used double sided tape.
The holder and the base/foot have an angle of 1° to match the angled box. Be aware of this when assembling.
The foot is put on asymmetric because of the lid.