1 / 2
(REMIX) Quickly Measure & Sort M2, M3, M4, & M5 Metric Screws up to 50mm Long - uses nuts instead of inserts — image 1
1 / 2

(REMIX) Quickly Measure & Sort M2, M3, M4, & M5 Metric Screws up to 50mm Long - uses nuts instead of inserts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a quick remix of Sneaks cool looking Metric screw measuring tool

Rating
5 / 5
Likes
18
Downloads
192
Makes
7
Views
1,402
Reviews
3

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

This is a quick remix of Sneaks cool looking Metric screw measuring tool (https://www.prusaprinters.org/prints/3408-quickly-measure-sort-m2-m3-m4-m5-metric-screws-up-). The only difference is that this is designed to use nuts which can be heat set into the tool, instead of inserts. Otherwise it is identical.

I printed and tested this, seems to work well with the nuts.

To heat set these, I screwed the nuts on the end a long bolt, and then used a jet butane lighter to heat them up, before seating them. This method has worked well in the past and is simpler (for me) than using a soldering iron, but as always use caution since it is easy to burn things or yourself. I held the parts with pliers to give some distance between my fingers and the torch.

 

Update 12/28/2021 (2) - Thanks to the suggestion (and helpful explanation) by Justin, I added a 2nd version which uses several small partial bridges in the pockets, which are only 0.2mm thick and intended to help with printing this without supports.  

The model which can be printed without supports is named “screw-tool-remix-1E-NOSUPPORTS.stl”.

Category: Hand Tools

 

Changelog:

8/31/2024: Found that the attribution did not carry over correctly when this was imported from Thingiverse.  Fixed that.

Tags