1 / 3
Tall feet against overheating of Qidi X-Smart 3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These 25mm tall feet make sure there's enough air circulation under the Quidi x-smart 3
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 106
- Makes
- 1
- Views
- 454
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
These 25mm tall feet make sure enough air circulation under the Quidi and therefore it's electonics is possible when doing high temp Printing for example PA12 at 280°C Nozzle Temp and 100°C Bed Temperature, as I like to. With the feet I've done over 4hours prints with no problems… without, the printer would often crash, I guess for overheating.
I've added slots in the botom, where one could push in soft Filament to make it stick on the table more. I don't have any, so I couldn't test.