Toyota Supra MK5 subwoofer ports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom subwoofer ports (air exit to the boot/trunk) for Toyota Supra MK5 / MKV to fix the bass resonance.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 124
- Makes
- 0
- Views
- 996
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You’ll need this if you are doing a sound isolation in your MK5 Supra to fix the subwoofer rattle. Follow one of the tutorials below
I have remixed a model from Thingiverse - shortened the back pipe and added a collar to it so that it would hold to the thin horizontal back panel without a use of glue or screws. I have printed mine on an SLA printer (0,1 mm layers is enough) to make it look OEM and am pretty happy with the results. I have used Prusa Tough Rich Black resin and coated the visible outer part with 2 layers of matte transparent spray laquer (to prevent visible scratches, resin prints scratch easily).

As a bonus I have also added a simple model to use as a speaker mesh to cover the metal cage and wadding behind the subwoofer port. The file is just a 9x9 cm square, to make it a mesh you have to set top and bottom layers to 0 in your slicer and infill to 30 or 40 % honeycomb to make it a mesh, I have printed mine in PLA and stuck it there with a double-sided tape on all sides so that it doesn't touch the metal. My personal tip is to spray paint the metal and wadding behind the speaker mesh with a matte black paint to make it even less visible.

Hope it helps and be sure to post your results ;)