Lightsaber electronics carrier
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Carrier for the electronics used in a lightsaber. This is a model for those who are constructing their own saber and need an easy electronics pack to slide into the body of the saber.
You need a slot diameter of 30mm with a minimum lenght of 160mm to accommodate the pack. The dimensions of this model are made for a Adafruit Prop Maker Feather with an Adafruit oval 8Ohm speaker and an 18650 battery and a small slide switch. The battery bay needs a spring to push the cell forward up against winded copper wires. The spring acts as the negative pad and the copper wire the positive.
Model file is provided in Autodesk Fusion format for those who needs modified dimensions.
UPDATE:
Added modified version with a different backplane for the battery and some rounded corners and a cabel groove on the bottom.