REDARC RedVision Magnetic Screen holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic screenholder for Redarcs RedVision system.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 73
- Makes
- 0
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had difficulty finding any models for the REDARC RedVision LCD display so I made this model.
This has a hole in the back if you want to screw fix it to a wall or something OR ive allowed for magnet slots in it two slots in the top 35x20x2.5mm and 6 slots in the bottom 5x7x2.5mm.
I used old hard drive magents for the top and round 5x2.5mm N52 for the bottom magnets.
Theres a flush mount cable channel that suits a 3.5mm ultra thin cat 6 cable.
The LCD mounting holes are for M4 brass threaded insearts. ID of hole is 5.5mm
You dont need to use redarcs bezel adaptor to fit this.