1 / 3
iPhone 15 Nachtischständer / iPhone 15 Nightrest — image 1
1 / 3

iPhone 15 Nachtischständer / iPhone 15 Nightrest

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€3.33 – €4.07 net (excluding VAT)

For file: nightrest_0.6n_0.35mm_PETG_MINIIS_1h48m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €3.70 excluding VAT (range midpoint).

Weight reported by the author
92 g
Print time reported by the author
1.81 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Für iPhone 15 mit Hülle / For iPhone 15 with Cover

Rating
5 / 5
Likes
71
Downloads
434
Makes
4
Views
2,841
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Wird das iPhone geladen und liegt quer hat man einen prima Wecker am Bett. Um dies bequem zu realisieren habe ich diesen Ständer mit integriertem Kabelhalter designed.

Mein iPhone ist in dieser Hülle.

Gedruckt in PETG, Düse 0,6 mm, layer 0,35 mm, kein Infill, keine Supports. Um eine bessere Oberfläche zu bekommen sollte der Halter senkrecht und um 45° gedreht gedruckt werden (siehe .3mf oder .bgcode).

Nicht das richtige? Vielleicht eins meiner anderen Modelle!

------------

If the iPhone is connected to power and is tilted sideways then you get an alarm clock, which is nice. To realise this in a convenient manner  I designed this night rest for the iPhone with integrated cable holder.

To be used with this cover!

Printed in PETG, nozzle 0.6 mm, layer height 0.35, no infill, no supports. To get a better surface the holder should be printed upwards and tilted by 45° (see the .3mf or the .bgcode).

 

Not the right thing? Try one of my other models!

Tags