1 / 6
Simple Key Hanger
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple model of a key hanger in the shape of a house.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 67
- Makes
- 0
- Views
- 410
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model of a key hanger. The hanger is very simple, and as such, it will match any interior decor. Thanks to the holes, it can easily be hung on the wall. If you want to avoid drilling, you can use double-sided tape. This is the largest possible size that can be printed in one piece on an MK4.
Recommended printing settings:
Filament: PLA
Brim: Not recommended
Infill: 25%
Nozzle: 0.4 mm
Prusa Slicer: Basic settings 0.20 mm Speed
Printing time: 3h 55min