Air Gun adapter 1/4" NPT to 1/4" tube and 1/4" compression fitting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2 versions for 1/4" NPT thread on air gun. 1 is for a 1/4" compression fitting 1 is friction fit for 1/4" OD tube
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 68
- Makes
- 0
- Views
- 479
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
I didn't have a blow tube for my shop air gun and didn't want to trip down to the store. Made 2 versions, both thread into 1/4" NPT at the end of an air gun. One is friction fit for 1/4" OD copper tubing and the other has 5/16"-24 threads and a relief inside to allow you to use a compression fitting. (While obvious, I will note, you will have to compress the brass fitting onto the copper tube using a metal fitting then take it off the fitting and screw it on here. Plastic is not strong enough to deform the brass.)
I used various files from others to make the threads. In particular I could not find 5/16"-24 so I used a 5/16"-20 and compressed it by about 20% to get the 24 thread pitch. Since I printed these in TPU it was close enough and it screws on easily.
Note: Both are printed in 95 TPU which provides flexibility as they get dropped/dragged around the shop so that they don't crack. Also this provides a little extra forgiveness in the threads. If you print in hard plastic the friction fit one is not going to work.
I printed at .1mm layer height not sure if you really need to especially with TPU as it will flex to match the threads.
Print Settings
Printer Brand:
Creality
Printer:
K1
Supports:
No
Resolution:
.1
Infill:
30
Filament: Overture 95 TPU
black
Notes:
You can likely use PLA or another hard plastic but the TPU is very forgiving of threading, provides a seal (which is not really needed here), allows a friction fit for the friction fit fitting, and is more resilient when using in a rough environment.
Category: Tools
