IKEA pencil eraser clip/cap (7mm hex)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clip with eraser holder for 7mm thick pencil, e.g. from IKEA
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
Clip with eraser holder for 7mm thick pencil, e.g. from IKEA. Can also be used as a cap / lead protector.
Printed from PETG standing upwards (see 3mf project file).
There might be a slight variation in the thickness of IKEA pencils, if too tight, sanding with sandpaper helps; if too loose, use a bit of tape .-) (Or, if you measure the pencil before printing, you can adjust the print size accordingly.)
I cut the eraser from a bigger piece into the hexagonal shape of the right size with a snap-off utility knife. Do not let too long piece of eraser stick out as it tends to be drawn out.