1 / 3

BTT SFS V2 2020 Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

3DesignsCH

@3DesignsCH

BTT SFS V2 2020 Mount

Rating: 0 / 5
Likes: 16
Downloads: 128
Makes: 0
Views: 691
Reviews: 0

Updated at source: Mar 10, 2024

Model information

Source: Printables
Category: Voron Parts & Upgrades
License: Creative Commons — Attribution — Noncommercial — Share Alike

Details Files (2)Makes & comments (Makes: 0) (Comments: 1)Remixes (1)Collections (24)

Mount for BTT SFS V2.0 for 2020 Extrusions.

The tolerances are for ABS/ASA filament.

Recommended print settings:

3 Perimeters/Walls
5 Bottom/Top layers
25% infill
0.2mm layer height

Use original screws to mount sensor to the mount.
8mm M3 Screw and M3 Hammerhead to mount to the extrusion.

My klipper configuration for the sensor:

[filament_switch_sensor switch_sensor]
switch_pin: ^PG12
pause_on_runout: True
runout_gcode:
  RESPOND MSG="Filament switch runout"
  SET_DISPLAY_TEXT MSG="Filament switch runout"              # Displays info
insert_gcode:
  RESPOND MSG="Filament switch inserted"
  SET_DISPLAY_TEXT MSG="Filament switch inserted"              # Displays info[filament_motion_sensor encoder_sensor]
switch_pin: ^PG13
detection_length: 10 # accuracy of motion sensor 2.88mm
extruder: extruder
pause_on_runout: True
runout_gcode:
  RESPOND MSG="Filament encoder runout"
  SET_DISPLAY_TEXT MSG="Filament encoder runout"              # Displays info
insert_gcode:
  RESPOND MSG="Filament encoder inserted"
  SET_DISPLAY_TEXT MSG="Filament encoder inserted"              # Displays info
[delayed_gcode DISABLEFILAMENTSENSOR]
initial_duration: 1
gcode:
    SET_FILAMENT_SENSOR SENSOR=switch_sensor ENABLE=0 #disable filament sensor
    SET_FILAMENT_SENSOR SENSOR=encoder_sensor ENABLE=0 #disable filament sensor
[delayed_gcode enable_filament_sensor]
initial_duration: 10
gcode:
    SET_FILAMENT_SENSOR SENSOR=switch_sensor ENABLE=1 #enable filament sensor
    SET_FILAMENT_SENSOR SENSOR=encoder_sensor ENABLE=1 #enable filament sensor
[gcode_macro _SFS_ENABLE]
gcode:
    SET_FILAMENT_SENSOR SENSOR=switch_sensor ENABLE=1 #enable filament sensor
    SET_FILAMENT_SENSOR SENSOR=encoder_sensor ENABLE=1 #enable filament sensor
[gcode_macro _SFS_DISABLE]
gcode:
    SET_FILAMENT_SENSOR SENSOR=switch_sensor ENABLE=0 #disable filament sensor
    SET_FILAMENT_SENSOR SENSOR=encoder_sensor ENABLE=0 #disable filament sensor

BTT SFS V2 2020 Mount

Model information

Tags