Neoteck Dial Gauge Slot Mount Ender 3 Pro (2020/4040)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple extrusion mount for this Neotek dial gauge for checking XYZ steps on an Ender 3 Pro.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 130
- Makes
- 2
- Views
- 1,060
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
A simple mount for this Neotek dial gauge (https://www.amazon.co.uk/Neoteck-Indicator-0-25-4mm-Indicators-Electronic/dp/B01H035DRO) to fit on an Ender 3 Pro in order to calibrate XYZ steps (see https://teachingtechyt.github.io/calibration.html#xyzsteps). Rather than finding an external clamp or an appropriate hotend mount, this attaches using v-slot nuts.
Print two of the spacers and attach to the bottom using 4 M3x6 bolts, self tapping into the spacers. These act as alignment for fitting to the X gantry, and as spacers to clear the y-belt for the Y gantry. The other holes can then be used with 2 M3 bolts (x6 for X gantry, x12-14 for Y) and 2 M3 drop in t-nuts to secure the holder to each gantry. On the X gantry you can clip the gauge in horizontally or vertically as needed for each axis measurement.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
No
Supports:
No
200
Infill:
20
Filament:
PolyMaker PLA
Notes:
Print the spacers with the top flat side on the bed.
Category: 3D Printer Accessories