DSO138mini ver.J (slim) case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This one is for J-version with TTL -external triggering (FW -110 or newer) and PC connectors. The kit's mother/display…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 167
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This one is for J-version with TTL -external triggering (FW -110 or newer) and PC connectors.
The kit's mother/display board connectors are recycled for those extra connectors so unit is like 1/2 cm slimmer than standard one (see the picture).
Print Settings
Rafts:
No
Supports:
No
200
Infill:
20
Filament:
PolyMaker PLA
Notes:
You'll probably need to flip TextF & Top STLs upside down.
Having two colors:
-save TextF gcode
-add Top on the slicer's build plate
-align Top exactly with the TextF (take under the buildplate view)
-remove the TextF
-set Z-hop 1mm
-save Top gcode
Printing:
-load text color filament
-print buttons
-clear the build plate
-print TextF.gcode (the txt color)
-switch the filamnent to case color
-print Top.gcode
-clear the build plate
-print Bottom one
Category: Electronics