Dirt digging claws for the garden glove
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
There are two versions one direct to be able to print without support, and angled one allowing the better protection…
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 129
- Makes
- 1
- Views
- 912
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
There are two versions one direct to be able to print without support, and angled one allowing the better protection for the finger (see picture to support & tip strengthening needed)
The stl-files are solid. This allows better scaling the objects with the slicer.
The baseline inside size width is 22mm with 1.2mm wall. Fits thin size8 glove's middle finger. -5% pinkie and -3-2% for the ring & index ones.
On the slicer
1) scale STL for the desired size
2) select number of the walls (3-4) a bit over extruding & heat will make part stronger & zero infill
3) Zero ('0') bottom layers
Category: Outdoor & Garden