Tesla Model 3 and Model Y Rear Center Console Arm Rest Tray
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€10.11 – €12.36 net (excluding VAT)
For file: Tesla arm rest console tray MM_0.4n_0.25mm_FLEX,PETG_XLIS_9h37m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €11.24 excluding VAT (range midpoint).
- Weight reported by the author
- 187 g
- Print time reported by the author
- 9.61 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Tesla Model 3 (2017-2023) and Model Y (2020-2024) console organizer for under arm rest location.
- Rating
- 5 / 5
- Likes
- 69
- Downloads
- 490
- Makes
- 4
- Views
- 2,514
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked this design and found it to be closest to the OEM one that Tesla used to provide for free. However, I found the STL to have some odd artifacts and difficult to paint in PrusaSlicer for a combined PETG+TPU print on my XL. Also the sharp corners are a risk for curling during printing.
I fully remade this model in Fusion 360, keeping all dimensions as close to the same as possible and rounding the corners. I also added features to the base to make it more rigid. I packaged the higher quality STL and the logo as separate bodies in a 3MF file for ease of manipulation. The new STL has smooth walls that paint very nicely.
As with the original, no supports required for layer heights up through 0.25mm
I created a multi-material print 3MF that has generic TPU on the interior faces and PETG on the exterior. Printing this gives it a soft-touch feel on the inside that reduces rattling of contents while driving. The multi-material 3MF project prints at 0.25mm and also changes the following default parameters:
- Flex TPU on extruder 4
- PETG on extruder 5
- Force wipe tower to be formed with PETG
- Max width of segment region = 1mm (this makes the TPU be a 1mm thick layer, keeping wall strength and reducing print time)
- gyroid infill (avoiding crossing infill is best with PETG and TPU)
- 4 bottom solid layers
- TPU Filament setting: Bed temperature same as PETG (ensures PrusaSlicer won't lower the bed temperature to TPU levels)