1 / 3
HueForge - Funny Chinchilla Sign
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A funny sign depicting a chinchilla as an 'angry potato'.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 96
- Makes
- 1
- Views
- 677
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
Chinchilla owners will understand…
My spouse and I refer to our chinchilla as a ‘potato’ quite often, so I figured I'd make a funny sign to display near her cage. The photo was made in Photoshop, then imported into HueForge.
Black, gray and white filaments were used for this print. A Bambu X1C profile is provided, as well as the original STL file. Please see below for the HueForge description, as well as settings (for those who may not have HueForge):
Settings:
- Layer Height = 0.08mm
- Initial Layer = 0.16mm
- Infill = 100%
- Outer Wall Speed = 60mm
- Inner Wall Speed = 120mm
- Infill Speed = 150mm
HueForge Description:
Filaments Used:
- PLA+ Inland Black (Spooless) Transmission Distance: 1.6
- PLA Inland Gray Transmission Distance: 2.4
- PLA+ Inland White (Spooless) Transmission Distance: 4
Swap Instructions:
- Start with Black (Spooless)
- At layer #7 (0.64mm) swap to Gray
- At layer #11 (0.96mm) swap to White (Spooless) for the rest.