Jura milk fronther
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Jura coffee machine's (e.g. Xs90) milk fronther replacement. The part should be printed food-safe material with heat…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 669
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Jura coffee machine's (e.g. Xs90) milk fronther replacement. The part should be printed food-safe material with heat resistance enough. The example is printed with PETG 1mm nozzle spiral mode.
After the print, two 2mm holes are drilled near tip.
Hot steam will make the PETG a bit soft, the nozzle can slip off - better support nozzle with the bottom of the milk container
Note: Even with food-safe material cleaning the milk residue is challenging so this would not be the best solution for the permanent use
Category: Kitchen & Dining