Siedler von Catan Kartenhalter + Box / Settlers of Catan Cards Holder + Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kartenhalter Catan & Erweiterung Städte und Ritter / Cards tray Catan & expansion Cities and Knights
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 56
- Makes
- 0
- Views
- 886
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
Kartenhalter für “Die Siedler von Catan” und das Erweiterungsset “Städte und Ritter” + dazugehörige Aufbewahrungsbox.
Der Kartenhalter ist für die deutsche Version ausgelegt, bei der die Karten eine Größe von 46mm x 72mm haben.
Gedruckte Teile:
- 2x Tray_Lower
- 2x Tray_Upper
- 8x Hinge
- 1x Box_Top
- 1x Box_Bottom
Zusätzlich werden benötigt:
- 8x M3 Schmelzeinsätze (OD5 mm L4 mm - “Voron” heat inserts)
- 8x M3 x 6mm FHCS
- Loctite blau
- Optional: 12x 2 mm x 4 mm Magneten
Die Schrauben sollten leicht angezogen und mit Loctite gesichert werden, damit sie sich nicht lösen oder sich festziehen.
----------------------------------------
Card holder for "The Settlers of Catan" and the expansion set "Cities and Knights" + storage box.
The card holder is designed for the German version, where the cards have a size of 46mm x 72mm.
Printed parts:
- 2x Tray_Lower
- 2x Tray_Upper
- 8x Hinge
- 1x Box_Top
- 1x Box_Bottom
Additionally required:
- 8x M3 threaded inserts (OD5 mm L4 mm - "Voron" heat inserts)
- 8x M3 x 6mm FHCS
- Loctite blue
- Optional: 12x 2 mm x 4 mm magnets
The screws should be lightly tightened and secured with Loctite to prevent them from loosening or seizing up.