CTC plywood frame shim plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These shim plates will increase the plywood frame strength as the lips prevent the plywood to split. Place the shim…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
These shim plates will increase the plywood frame strength as the lips prevent the plywood to split. Place the shim lips towards the bolt and the nut on the even side.
The very solid frame you'll get if you glue all parts (but Z rods top plate allowing the service) with normal PVA glue.
Sanding the black paint out from the glue joints wouldn't harm :-)
Before the glue is cured check that frame is square.
The original bolts & nuts keep the frame nicely in together during glue curing so no extra clamps are needed.
Category: 3D Printer Parts