Greaseweazle V4 5.25 inch Diskette Drive Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Contains a single "full height" or two "half height" 5¼" along with a Greaseweazle V4 and Mean Well power supply
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 347
- Makes
- 0
- Views
- 1,870
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
I wanted an integrated solution for my Greaseweazle V4, drives, and a power supply.
Bill of Materials
Quantity | Item |
|---|---|
1 | Greaseweazle V4 |
1 | Floppy ribbon cable |
1~2 | Diskette drives |
1 | Mean Well RD-35A power supply |
1 | IEC 60320 C14 panel mount socket |
1 | 26 x 13 mm panel mounted, clip-in power switch |
4 | M4 x 12 mm Flat Head Countersunk Screws (FHCS) |
4 | M4x6x8 brass inserts |
2 | M3 x 12 mm FHCS (for the C14 socket) |
6 | M3 hex nuts (2 for the C14 socket, 4 for the power supply) |
4 | M3 x 6 mm Button Head Cap Screws (BHCS) (for the power supply) |
4~16 | Drive screws, either #6-32 or M3 as appropriate |
1 | Drive power wiring harness - I salvaged mine from an old PC power supply |
3 | Female “Quick Disconnect” crimp connectors |
6 | Fork crimp connectors |
4 | Stick-on rubber feet |
| Electrical wire |
| Soldering supplies |
Notes
Disclaimer: building this involves mains power - do so at your own risk.
The power supply installation is difficult and requires a long hex driver to reach the screws in the back and bottom of the case, a flexible extension also helps.
The 3.5" to 5.25" drive bay adapter is from rmpel's FluxEngine-related work.
My exemplar is printed in Polymaker “Natural” ASA which matches pretty well with 1980s and 1990s beige electronics.