1 / 4
Doggo
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing Instructions:
- PLA, 0.2mm, 15% infill.
- Only the muzzle needs minimal organic supports - the tail is fine without supports.
Below: Support settings to “Support on build plate only” and a support blocker on the entire dog except the muzzle (PrusaSlicer).
Happy printing!