Insteon Mini Remote Screwless Bracket

I wanted to mount an Insteon Mini Remote on my kitchen cabinet without making any screw holes, so I designed this bracket. It fits current production Leviton single gang switchplates and possibly others. Unlike the standard Insteon mini-remote mount, the wall-facing surface is closed and large enough to use two 3M Command strips for mounting.

The switchplate screws self-tap into the bracket. I cut the switchplate screws by 1-1/2 turns so they didn't dig into the cabinet. To complete the disguise I tucked the tails of the Command strips under the switchplate. Looks just like the real thing.

Also included is a narrow version that should work with all other types of switchplates, but I haven't tested it. If you make one please post your results.

Check out my other Insteon things:

If you want to mount over an existing box you might like my Insteon Mini Remote Bracket for Existing Boxes https://www.printables.com/model/799374-insteon-mini-remote-bracket-for-existing-boxes.

If you want the original style Mini Remote mount check out my Insteon Mini Remote Wall Mount Bracket p/n 2444B4 https://www.printables.com/model/799375-insteon-mini-remote-wall-mount-bracket-pn-2444b4.

Print Settings

Rafts:

No

Supports: 

No

Resolution:

0.1mm

Infill: 

20%

Notes:

Printed using white PLA and fine 0.1mm layer resolution on a glass bed. Make sure your print bed is well-leveled to get a nice smooth bottom surface to which the Command strip can adhere.