Survival Outdoor Nähzeug Schraub Box
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.22 – €0.27 net (excluding VAT)
For file: Nahnadel Deckel.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.25 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 18 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A little Screw on box for some needles and a roll off thread. Kleine Schraubbox für Nähnadeln und Rolle Faden.
- Rating
- 0 / 5
- Likes
- 45
- Downloads
- 121
- Makes
- 0
- Views
- 1,473
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Eine kleine Zylinderförmige Box mit ca. 130×20mm, wobei der Stift 8mm Außendrchmesser, 5mm Innendurchmesser und 80mm Länge hat, für lange und kurze Nadeln, sowie eine Rolle Faden Platz da ist. Schön mit einem Loch für Paracordschleife oder einem Karabiner. Perfekt für Outdoor Schlafsack reparieren oder ähnliches. Beide Deckel sind schraubbar und sollten M8x1.25 Gewinden sein.
Ich habe Weißes PLA Filament von Creality benutzt.
Nähnadel Stift
Layer height: 0.2mm
Build plate adhesion: Raft
infill: 10%
Nähnadel Deckel mit Loch
Layer height: 0.2mm
Build plate adhesion: brim
infill: 10%
Support: no
Nähnadel Deckel
Layer height: 0.2mm
Build plate adhesion: brim
infill: 10%