Tweezers (2 types)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two tweezers, each with different points.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 42
- Makes
- 2
- Views
- 163
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
My metal tweezers invariably get magnetised from general use. Normally getting magnetised is not a problem and can be demagnetised with some effort, too. The magnetism becomes an nuisance when handling small nuts and bolts that I often do.
Instead of constantly fiddling with my demagnetiser, I decided to design my own non-metallic tweezers. These tweezers are made with PLA-CF and have very good rigidity, hence spring open nicely.
I've shared two tweezers with different tips, large and small, respectively.
My print is made in Bambu Lab PLA-CF 1.75mm Burgundy Red filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer. No supports required. Wall Loops = 4.
I hope you can find this print useful, too.
Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.
For more of my models, see my main uploads site at MakerWorld as “Wiseone”.