Honeycomb Medal Display Hanger Modular System
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These honeycomb medal display hangers are designed to display your collection of medals in an ever expanding display.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 160
- Makes
- 3
- Views
- 2,670
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial
These honeycomb medal display hangers are designed to display your collection of virtual challenge medals in pride of place on your wall.
The honeycomb shape allows your collection to expand as you earn more medals and looks great when you have one or one hundred medals!
They are sized to suit medals supplied by "Race The Distance" in the UK but it should work with other medal suppliers, Conqueror, Race At Your Pace etc... Ribbon slot is designed for up to 30mm wide ribbons and the inner disc is approx 100mm diameter
The magnetic message piece is optional and I have uploaded a SOLIDWORKS 2018 part file to allow others to create custom messages
You will need 6x 6mm X 3mm neodymium magnets and suitable glue to hold them in place, I used UHU. For heavier medals you may need additional magnets and there are extra holes for another two sets.
To wall mount use double sided sticky pads.
I printed all parts with the outside face down on a pei sheet to give a smooth shiny surface. Tree support will be needed for the base if printing this way.
5% gyroid infill was plenty.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
5%
Filament:
Geetech Silk PLA Copper