1 / 6

Magnet Installation Tool 6x3

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

JD 3D Design

@JD_3D_Design

I use this tool to install magnets in the correct orientation.

Rating: 0 / 5
Likes: 5
Downloads: 34
Makes: 0
Views: 335
Reviews: 0

Updated at source: Jan 12, 2025

Model information

Source: Printables
Category: Tools
License: Creative Commons — Attribution — Noncommercial — Share Alike

Details Files (2)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (11)

Magnet installation

Place the magnets on the installation tool, with the plus sign facing upward. Apply a small dab of super glue to the magnet. Then press the magnet into the pocket.

For the joining part, place the magnet on the side opposite the plus sign. Ensuring the magnets will be attracted to one another when the parts are assembled.

Slicer settings
MATERIAL-PLA
Nozzle-0.4mm
LAYER HEIGHT-0.2mm
INFILL TYPE-Grid
INFILL PERCENTAGE-25%
WALL COUNT-2
TOP/BOTTOM LAYER-3

Required hardware
1 6x3 neodymium magnet

Add a pause after layer 19(3.80mm) to install the magnet. Optionally change the filament color, then resume printing to encapsulate the magnet. I recommend installing the magnet with the north polarity facing upward. If you have a compass you can find the polarity of a magnet.