Cooling tower ultrasonic atomizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spolana-inspired cooling tower, a stylish home accessory with an ultrasonic atomizer for creating a genuine smoke cloud.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 97
- Makes
- 1
- Views
- 963
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Recommended for tower print is stone or concrete-textured filament. For inner parts, I used phosphorescent material for a stunning glow effect in the dark. Additional ultrasonic atomizer (mist generator) is required for printing, such as this one: https://allegro.cz/nabidka/ultrazvukovy-generator-mlhy-zvlhcovac-vzduchu-mlhy-pro-jezirko-zahradu-15092757286?utm_source=notification&utm_medium=cartWithPaymentCz&utm_campaign=fd8eae09-a77e-4400-bc26-84bdf1c5e8ec . The showcased model used a 0.6mm nozzle on an older Prusa printer, with a layer height of 0.15mm. No supports were used in printing. The model can be connected to a smart electrical outlet with a timer setting. Since water heats up in the tower, it's advisable to run it intermittently. The rising steam is excellent for humidifying the air but may impact electronics. I recommend placing a tray or moisture-resistant mat under the tower for added protection. The model's usage is entirely at your own risk. :)