Bambu Lab Y-Splitter for AMS and Side mounted external feed
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows the use of AMS in combination with a side mounted external spool feed
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 296
- Makes
- 0
- Views
- 1,703
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just another Y-Splitter for the Bambu Lab P1 and X1 Series
it is to be used with PC4-M10/MF10 connectors
i designed this model since none of the available models 100% satisfied my needs and i needed some stable solution for external feeding from a Sunlu S2 Filament Dryer and the AMS
BOM
- 2 x original screws for PTFE coupler
- 3 x PC4-M10 connectors (Amazon Affiliate Link)
keep in mind most PC4 connectors with “M10” threads actually have M10x1,0 and not M10x1,5 threads, so they are actually MF10 - if you are unsure about your connectors, make a test print of the thread first and see if it fits
Printing
Upright with the “bottom” side of the Y facing downwards
use tree supports only on build plate
print it with minimal layer height - preferrably with a somewhat ductile filament, PETG, ABS or ASA works well
Assembly
- Thread the PC4-M10 Connectors in the 3 openings, gently tighten them
- insert some silicone tubes into the connectors and guide a piece of filament (preferably anything hard like PLA or PC) through mulitple times to smooth out the fray opening on the side facing the extruder
- remove the silicone tubes and the connectors again and remove any loose debries
- reassemble and install them with the original screws from the original filament guide
Credits
Thx to @Harald Geisler who provided my with the step files for his splitter, made the process in figuring out the internal geometry much easier