Ducati Helmet Lock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A thick clamp to house a small padlock that is used to hook and secure a helmet at the D-rings on the chin strap.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 43
- Makes
- 0
- Views
- 527
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I got tired of hanging the helmet over the mirrors when doing a quick stop, and then having to re-adjust the mirrors each time. So I created a thick clamp with a hinge to house a small padlock, that could be attached to the frame of the Ducati Monster, that would allow a rider to hook and secure their helmet.
The idea is to place the clamp over a suitable area of the exposed frame of the Ducati Monster, allowing a rider to hook and lock their helmet using the housed padlock.
NOTE: Im fully aware that this probably isn't the most secure method for locking a helmet to the bike, given that the filament used is at best thick durable plastic. But it is a great alternative to having to lug a helmet with you if you'd rather leave it with the bike, and not worry about it dropping or re-adjusting your mirrors.
Required parts:
- padlock 20mm (of course you can adjust the STL design to accommodate the padlock you'd prefer).
- paperclip (for the hinge)
Print using a strong filament, with 80% infill, using normal support at 65 degrees.