Wyze Cam OG Magnetic Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Looking for a convenient ceiling mount for your Wyze Cam OG in your Original Prusa Enclosure?
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 33
- Makes
- 0
- Views
- 401
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a simple camera that didn't require a storage plan for use in my Original Prusa Enclosure so I went with the Wyze Cam OG. In order to locate the camera in the best spot for me with flexibility I decided to magnetically mount it to the top.
To do that required the following hardware;
- 4 - 0.7'' D x 0.19''H Black Ceramic Magnets (Amazon Link)
- 2 - M4 x 10mm, 0.70 Pitch Flat Head Countersunk Machines screw (Amazon Link)
- Note I picked mine up from my local hardware store
- 2 - M4, 0.7 Pitch Hex Nuts (Amazon Link)
- Note I picked mine up from my local hardware store
I printed my mount using PETG at 0.20mm resolution.
Cap is friction fit in place and holds tightly.
Note when installing magnets use extra magnets on backside of magnet holes to ensure magnets don't move out of place.
To ensure nuts hold in place use screws to secure them when installing cap into mag base.
If for any reason you need change anything up you can easily use a small flat head screw driver to pry the cap off from the base using the small indented slot.
Last note is that I secured the cable the cable to the enclosure using zip ties.
For information on the camera here are links;
- Wyze Cam OG (Amazon Link)
- Memory Card (Amazon Link)
- USB Power Station (Amazon Link)
- I have 5 cameras in 4 enclosures all plugged into the same power station