M. C. Escher's Print Gallery - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
M. C. Escher's Print Gallery made with HueForge.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 36
- Makes
- 0
- Views
- 205
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Overture Black Transmission Distance: 0.7
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Overture Cement Gray Transmission Distance: 0.6
PLA PolyLite Steel Grey Transmission Distance: 1
PLA Overture Light Gray Transmission Distance: 0.7
PLA+ Esun Bone White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Charcoal Black
At layer #10 (0.88mm) swap to Cement Gray
At layer #14 (1.2mm) swap to Steel Grey
At layer #16 (1.36mm) swap to Light Gray
At layer #21 (1.76mm) swap to Bone White for the rest.