Open PC Frame 1 (OPF-1)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted all my ports on one side and a minimal number of fans. This is printed with Atomic filament Carbon fiber PETG…
- Rating
- 5 / 5
- Likes
- 102
- Downloads
- 315
- Makes
- 1
- Views
- 5,073
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted all my ports on one side and a minimal number of fans. This is printed with Atomic filament Carbon fiber PETG on a Railcore. 0.2mm layer height, 2 perimeter 25% infill, 5 bottom 7 top layer.
The 1.7kg frame has to hold 12-14kg of components. Do not use PLA as it will soften at 60C. Regular PETG is fine. You need a 30x30cm print bed, 6-32 and M3 screws and M3 Heat Set Inserts. The three back panels are glued and the rest is screwed together. The MB sits on 5.5 mm spacers.
Broke Center 3 into two parts for easier printing. Updated front and back panels
Parts are not oriented for printing.
Updated with files to use a 3D printed I/O panel. Frame 1 V3, Frame 2A V3, Frame 2B V3, Front PCI 1 and PCI 2. Glue the two I/O panel parts together with cyanoacrylate and some kicker. For air cooled graphic cards I would stick with the Al I/O Panel.
Made for Asus Maximus XII Extreme.
Also put in an MSI X99A GAMING PRO CARBON and water cooled SLI 1080s.
Power supply: EVGA SuperNOVA 220-G3-1000-X1,1000 G3, 80 Plus Gold 1000W
Radiator: EKWB EK-CoolStream SE 360 Radiator, Slim Triple, Black
Reservoir/pump EK-Quantum Kinetic FLT 240 D5 PWM D-RGB
I/O panel: www.mountainmods.com/product_info.php?products_id=486
NOYITO 16mm Chassis Switch Metal Button Switch
Please realize that I only share designs I make for myself because I need them and to have fun. They are shared all under non-commercial share alike license. This is meant for makers and requires some careful consideration and tools. Importantly, this is a experimental design and not a commercial product. Please send feedback and concerns.
I am not qualified to advise on specific PC parts. For that please follow your favorite youtube channel. Please ask questions on twitter and I will try to help when I have time. If you don't have a 3D printer or your build plate is too small, visit your local maker space. Have fun making and share the results.
Empiricus@Dremomys
Print Settings
Printer:
Railcore
Resolution:
0.2
25%
Filament: Atomic filament Carbon fiber PETG Black
Category: Computer