Headphone Cushion Mold
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Got tired of buying headphone cushion replacements. This is a mold for casting cushions from silicone or silicone…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 10
- Makes
- 0
- Views
- 307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Got tired of buying headphone cushion replacements. This is a mold for casting cushions from silicone or silicone foam. Made for some beats headphones with diameter of 70x65 mm when the cushion is removed. I used Smooth-On Dragon skin FX-Pro I had around. Close the hole in the bottom with some tape. Open the mold about 1 cm. Fill the mold half way with silicone, ad the center piece in the right orientation and close the mold and tighten the screws. Ad silicone if required. Put a heavy flat object on top. Use a screw driver on both sides to slowly open the mold. Needs 80-90ml silicone. 2x45mm M3 screws.
Empiricus@Dremomys
Category: Audio