Cubone's Gastly Haunters
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hueforge file 200x150 on Cubone getting some Gastly;s Haunters
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 68
- Makes
- 0
- Views
- 373
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This File is 200x150mm . If you have a smaller build plate you can change the size, but DO NOT CHANGE THE Z it will throw the colors off.
You are not limited to the colors I used, you do not have to use bambu colors. Using the colors I used are will give you the look I printed.
2 file types. One is the 3mf from bambu studios created using a Bambu P1S profile. Other is just the stl file and you will need to apply the layer color height changes.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.48mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5.1
Swap Instructions:
Start with Black
At layer #5 (0.8mm) swap to Blue
At layer #9 (1.12mm) swap to BambuLab Green
At layer #15 (1.6mm) swap to Jade White for the rest.