Wall / backboard mount for Victron VE.Direct / MK3 - USB cables
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prints for mounting Victron VE.Direct - USB and MK3 - USB connectors, with optional pedestals for cable management
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 152
- Makes
- 0
- Views
- 1,285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
These prints help tidy up Victron VE.Direct / MK3 - USB cables on a wall/backboard.
With them, the Victron cables can be mounted directly to the wall/backboard or on a matching pedestal.
The pedestals raise the cases above the wall/backboard and in doing so also provide a way to remove the slack from excessive cable lengths - by wrapped the extra cable around the pedestal.
The case and pedestal together are designed to be the same height as a Victron MPPT (150/35).
If the pedestal is used, a 3 ½" screw may be used to mount it and the case to back board, if the pedestal is not used a shorter screw, for example ¾", may be used.
This package contains the .STLs, PRUSA Slicer files, and the Fusion 360 source files.
To match the colour used on Victron devices, the cases may be printed in Light Blue (RLA 5012).
If you are interested in these models, you may also be interested in a similar set of models for
- mounting a Raspberry Pi Zero 2 ( https://www.printables.com/model/805682 )
- mounting a SMAYS Micro USB to ethernet Adapter - OTG hub Adaptor ( https://www.printables.com/model/821064 )