Bambu AMS Buffer Vertical Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A vertical mount bracket for the Bambu X1/P1 series filament buffer.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 92
- Makes
- 2
- Views
- 984
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to feed my AMS units into my P1P from the left side and wanted to avoid a large 180 degree loop that could put more drag on my filament, so I made a bracket to mount the buffer vertically on the side. I added a feed guide to keep the PTFE tubing straight as it goes into the buffer. You will need 3 M3x8 screws to attach it to the printer. Simply attach the buffer to the bracket using the original screws, the attach the bracket to the 2 external spool holder holes and one of the case screw holes. This works better if you reverse the direction of the cable and put the right angle plug on the buffer instead of the printer, as seen in the pictures. This doesn't interfere with my poop chute, but YMMV.
I would have included the STEP files but I had a power off before I saved the file in F360. I built this off of Okietronics STEP file so I'd start with his files if you wanted to remix this.