Imperial - Fractional Drill Bit Stop Collars with Storage Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Entire set with storage tray. Zip file available
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 76
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are drill collars (aka stops, bushings) to set up for specific repeatable hole depths.
Includes all 1/64 increment sizes between 3/32 and 1⁄2. These are embossed with sizes.
These are setup for a single pan head type sheet metal screw, these are just the widely available flat head screws marketed as “sheet metal” screws with slightly more threads than a wood screw. For sizes up to 1⁄4" use a single #6-5/8" screw, above 1⁄4" use a #8 x 3/4" screw. DO NOT use with screws longer than 3⁄4", the protruding point will extend out and could rip open your hand or snag loose items.
I have also designed a tray to hold the entire set in your toolbox or drawer. It has a cutout for a stubby Phillips screwdriver to tighten the stop collar on your bit. *Note tray dimensions (190mm x 210mm) and compare them to your printer build plate size.
You can download individual sizes as needed or the entire set is available as well in a zip file.