1 / 3
Knob for 1/4" sized bolt/nut
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Knob for a 1/4" knob or bolt. The knob/bolt is captured on the "right side" in my opinion.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 64
- Makes
- 0
- Views
- 217
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
I needed a knob for ¼"-20 (well threading doesn't matter but nut / bolt heads sized for ¼" english hardware.
There is a slight amount of slop in the hex area to make sure the nut / bolt head slips in without too much force. All areas have a filet except for the bottom where the bolt passes through.
Printed mine with 3 perimeters 20% infill. I added a bolt and tweaked it down pretty good, more force than I think someone would with a fastener like this and it held-up without issue.