USM Haller cable mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These mounts screw directly to the USM ball connector using M8x6, or slightly longer, fine pitch (!) screws. Note that…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 91
- Makes
- 0
- Views
- 1,257
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
These mounts screw directly to the USM ball connector using M8x6, or slightly longer, fine pitch (!) screws.
Note that regular M8 thread will not work (really, I tried). Since this type of screw is very tough to find, I'm including a printable low-profile screw version rendered with the excellent Nut Job library (https://www.thingiverse.com/thing:193647) by Mike Mattala (thank you so much). This screw will require a size 4 Allen key.
The cross, "T" and corner pieces need to be printed flat, but don't require supports (unless your printer or material performs particularly poorly with overhangs). Shown test pieces were printed in PLA, but black PETG is probably best (especially for printed screws).
Print Settings
Printer:
BIQU B1
Rafts:
No
No
Resolution:
0.2mm
20%
Filament: Prusa PLA light green
Category: Organization